20pcs 1/8 & 1/4 " Tungsten Carbide Burr Rotary Drill Bits Tools Cutter Files Set

Description

eBay
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
Shop Category
Hot Item
20pc 1/4&1/8" Shank Tungsten Carbide Burr Rotary Drill Bit Tools Cutter File Set
USD 15.19
Picture
20pcs 1/8 & 1/4 " Tungsten Carbide Burr Rotary Drill Bits Tools Cutter Files Set
Item Specifics
Brand
Unbranded
MPN
Does Not Apply
Tool Bit Material
High Speed Steel
Custom Bundle
No
Modified Item
No
Product Dimensions‎
2.4 x 0.4 x 3.9 inches
Type
Carbide Rotary Tool
Color
As Shown
Material‎
Carbide
Country/Region of Manufacture
Unknown
Specification:
Material‎：Carbide
Color: As Shown
Type:Carbide Rotary Tool
Product Dimensions‎：2.4 x 0.4 x 3.9 inches
Product Description
【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times.
【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc.
【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges.
【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute.
【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting.
Wear-resistant
Made of high-quality hard tungsten steel material, the
carbide burr
has higher hardness, higher wear resistance, heat resistance and corrosion resistance. Compared with HHS rotary cutter and small grinding wheel, the efficiency is greatly improved.
High efficiency
The use of this
carbide rotary file
is very simple, mainly used on electric or pneumatic tools. When using
carbide burr
, only need to clamp the tool upright. The cutting method is best to choose up-cut milling to avoid reciprocating cutting.
Double Cut Cutter tends to be used on non-ferrous and ferrous metals, soft steel, aluminium and also for all other materials such as wood, stone and plastics. As there are more cutting edges, it removes material faster. These are the most popular cut and will see you through most applications.
Single Cut Cutter have a right handed (Up cut) spiral flute. These tend to be used with hardened steel, stainless steel, , copper, cast iron, and ferrous metals and removes material quickly. Use for heavy stock removal, milling, deburring and cleaning.
Comprehensive
The
tungsten carbide rotary file
can be widely used in steel machinery, aviation, automobile, shipbuilding, chemical industry, sculpture and other industries. And the
cutting tools
can be used on Aluminum, Brass, Bronze, Carbon fiber, Cast iron, Ceramics, Copper, Fiberglass, Gold, Hard rubber, Plastic, Platinum, Silver, Steel, Stone, Titanium, Wood, Zinc etc.
Precautions
The
rasp
set will work with most small
rotary tools
such as electric drill. The tool needs to be clamped upright (use a wrench to tighten it). Make sure to wear appropriate personal protective equipment such as gloves and protective eyewear while using
carbide burr
fitted rotary tools.
You may also like
20pc 1/4&1/8" Shank
USD 15.19
Payment
Payments are accepted through Paypal only. It's a quick, safe and free way to pay for your online purchases.Payments are instant, so we can prepare your order for shipping as soon as you have paid.
Payment is expected within 5 days from end of auction.
Shipping
If you have not received your item after estimated delivered days, please do not hurry to open case to us. We would recheck the shipping status for you and decide refund or something in your request.
We do COMBINED SHIPMENT on any multiple purchases. We are pleased to grant a 10% shipping cost discount on purchases with more than one (1) item.
We are also happy to offer personalized discounts for larger order.
Returns
Return & Replace.
All returned products must be in their original packaging with all included accessories intact,and must be accompanied by a copy of the Return Item Authorization (RMA) issued by us,and sent to the address indicated in the Return Item Authorization.We shall notify you once we have received and processed your returned item. We typically process your returned items for evaluation & investigation within seven (7) days of receiving them.If it meets our warranty requirements,a refund will be given or a brand new replacement unit will be sent to you at our cost.
Taxes & Custom Duties.
The shipping cost does not cover any local taxes, import duties, customs clearance,or any other import-related costs levied by your government.Please check with your local customs office for more information.
Contact US
We handle large emails every day. Please allow us to reply your email within 48hrs.(Monday-Friday). Emails will not be answered weekend or holidays.
If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.